DigiDesign 96 I/O Handbuch - Seite 16

Blättern Sie online oder laden Sie pdf Handbuch für E/A-Systeme DigiDesign 96 I/O herunter. DigiDesign 96 I/O 19 Seiten. Version 8.0

Remove the five screws on the front plate of

the card to be removed.

To discharge any static electricity, touch the

power supply casing. It is a good idea to do this

often, throughout the process.

Touching power supply casing to discharge any

static electricity

96 I/O Guide

Pull the card out by gripping the edges be-

tween your thumb and forefinger on each side.

Pull straight back, lifting very slightly to avoid

contact between components on the underside

of the card and the 96 I/O back panel faceplate.

When you remove a card, pay particular

attention to keeping components on the sur-

faces of the card from bumping into any of

the internal components or the back panel on

the 96 I/O.

Place the card immediately in an anti-static

bag and send it to Digidesign according to in-

structions from Digidesign Customer Support.

Hardware Setup Changes After

Removing a Card

The Hardware Setup dialog reflects the removal

of an I/O card by settings corresponding inputs

and outputs to None. The remaining inputs and

outputs will function normally.