Epson ActioPrinter 2250 Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Handbuch für Drucker Epson ActioPrinter 2250 herunter. Epson ActioPrinter 2250 13 Seiten. Epson printer specification sheet
![Epson ActioPrinter 2250 Handbuch](/uploads/products/server2/466458/466458.png)
ActionPrinter 2250
Continuous paper:
Width
101 to 254 mm (4 to
Copies
Three sheets (one original plus two copies)
Thickness
0.065 to 0.25 mm (0.0026
Weight
53 to 82
40 to 58 g/m2 (12 to 15 lb) per sheet in multi-part
forms
Use only two or three-part carbonless multi-part
l
forms and use them with the push tractor.
Note: You can use recycled Paper under normal conditions. If you notice
increases in ribbon consumption and paper jamming, use a higher grade of
paper.
Labels:
Size
101 to 254 mm (4 to 10 inches) width for backing
sheet
63.5 x 23.8 mm (2.50 x 0.94 inches) minimum for a
label
Thickness
0.07 to 0.09 mm (0.0028 to 0.0035 inches) for backing
sheet
0.16 to 0.19 mm (0.0063 to 0.0075 inches) total
Weight
68 g/m
Use only continuous type labels and use them
l
only with the push tractor.
Use labels only under normal temperature and
l
humidity conditions.
Envelopes:
Size No. 6
166 x 92 mm (6.5 x 3.6 inches)
No. 10
240 x 104 mm (9.5 x 4.1 inches)
Thickness
0.16 to 0.48 mm (0.0063 to 0.0197 inches)
Weight
45 to 75 g/m
Use envelopes only under normal temperature
l
and humidity conditions.
Load envelopes manually, with the longer side
l
inserted into the rear slot.
Printable area:
Single sheets (paper cassette and manual insertion) and envelopes
A
The minimum top margin is 8.5 mm (0.33 inches).
The
B
minimum left margin is 3 mm (0.12 inches).
The minimum right margin is:
3.8 mm (0.15 inches) for the A4-size paper cassette
9.7 mm (0.38 inches) for the letter-size paper cassette
3 mm (0.12 inches) for manual insertion
However. the maximum printable width is 203 mm (8 inches).
C
The minimum bottom margin is 13.5 mm (0.53 inches).
AP-2250-2
10 inches)
to
inches) total
0.0098
2
g/m
(14 to 22 lb) for one sheet
2
(18 lb)
2
(12 to 20 lb)
area
printable
C
A
A
The minimum top and bottom margins above and below the perforation are
9 mm (0.35 inches).
B
The minimum left margin is 13 mm (0.51 inches).
The minimum right margin is 13.8 mm (0.54 inches).
The maximum printable width is 203 mm (8 inches).
Mechanical
Paper-feed methods:
Ribbon:
MTBF:
Print head life:
Dimensions and weight:
Electrical
120 v model:
Rated voltage:
Input voltage range:
Rated frequency range:
Input frequency range:
Rated current
Power consumption:
Dielectric strength:
Environmental
Temperature: Operation:
Storage:
Humidity (without condensation):
Operation:
Storage:
Safety approvals
Safety standards:
US model:
RFl:
US model:
7114/92
Friction (paper cassette and manual insertion)
Push tractor
Black ribbon cartridge S015047
Life expectancy: 3 million characters at
14 dots/character
4000 power-on hours
200 million strokes/wire
Height
130 mm (5.1 inches)
375 mm (14.8 inches)
Width
252 mm (9.9 inches) without push tractor
Depth
307 mm (12.1 inches) with push tractor
Weight
4.5 kg (10 lb) without push tractor
4.9 kg (10.9 lb) with push tractor
AC 120 V
AC 103.5 to 132 V
50 to 60 Hz
49.5 to 60.5 Hz
1.1 A
Approx. 30 W (during self-test printing in draft mode
at 10 cpi)
AC 1 kV rms, 1 minute or AC 1.2 kV rms, 1 second
(between AC line and chassis)
5 to 35°C (41 to 95°F)
-20 to 55°C (-4 to 131°F)
30 to 80% RH
5 to 85% RH
UL1950 with D3, CSA22.2 No.220
FCC part 15
B class B
subpart
9-Pin
Printers