arcelik OI 636 Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kochfeld arcelik OI 636 herunter. arcelik OI 636 20 Seiten.
Seite drucken
3
Installation
Refer to the nearest Authorised Service Agent for
installation of the product. Make sure that the
electric and gas installations are in place before
calling the Authorised Service Agent to have the
product ready for operation. If not, call a qualified
electrician and fitter to have the required
arrangements made. The manufacturer shall not
be held responsible for damages arising from
procedures carried out by unauthorized persons
which may also void the warranty.
Preparation of location and electrical and
gas installation for the product is under
customer's responsibility.
DANGER:
The product must be installed in
accordance with all local gas and/or
electrical regulations.
DANGER:
Prior to installation, visually check if the
product has any defects on it. If so, do
not have it installed.
Damaged products cause risks for your
safety.
*
min.
Before installation
The hob is designed for installation in a
commercial worktop. A safety distance must be
left between the appliance and the kitchen walls
and furniture. See figure (values in mm).
•
It can also be used in a free standing
position. Allow a minimum distance of 750
mm above the hob surface.
•
(*) If a cooker hood is to be installed above
the cooker, refer to cooker hood
manufacturer' instructions regarding
installation height (min 650 mm)
•
Remove packaging materials and transport
locks.
•
Surfaces, synthetic laminates and adhesives
used must be heat resistant (100 °C
minimum).
•
The worktop must be aligned and fixed
horizontally.
•
Cut aperture for the hob in worktop as per
installation dimensions.
7/EN