DiGidot PXLNET Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Handbuch für Transmitter DiGidot PXLNET herunter. DiGidot PXLNET 17 Seiten.

Power supply

To power this product, the DC+ and DC- (GND) of the terminal connector must be connected to a

SELV rated power supply that provides appropriate power at the required supply voltage; 12-24 V

Connect the power supply, DC+ and DC- (GND) to the corresponding power inputs of the DiGidot

PxLNet Transmitter terminal connector.

When the Transmitter is powered and started up, the status light next to the power input will show a

blue light.

IMPORTANT: Make sure to equalise ground potentials.

Always connect ground (DC-) of DiGidot C4 controller/PxLNet Transmitter to every power supply,

connected to every product that is controlled by a single DiGidot C4 controller.

If the grounds are not connected, this may cause malfunctioning.

PxLNet Transmitter (20342) Manual

Version 1.8 - November 2021 |

11 17