ArcFamily ArcEquine Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medizinische Ausrüstung ArcFamily ArcEquine herunter. ArcFamily ArcEquine 16 Seiten.

Seite drucken

What's in the box

1 x Delivery Unit
Consumable items
1 x Plug charger
1 x User manual
1 x Leg strap with press studs
2 x Carbon rubber ArcPads
1 x Conductive gel (250ml)
The leg strap and carbon rubber ArcPads
have been specifically designed for durability,
comfort and connectivity. The carbon rubber
ArcPads are fixed to the leg strap with press
studs. Remove the carbon rubber ArcPads and
wipe clean with warm water after each use. The
leg strap can be lightly brushed after each use
but should not come into contact with water.
The conductive gel has been specifically
formulated for use with ArcEquine.
The contents comply with all equine and
veterinary regulations and requirements.
Use of gel enables electrical connectivity
from the carbon rubber ArcPads, through the
hair, to the skin of the horse.
Guarantee
ArcEquine offers a 2 year guarantee from
the date of your purchase of the ArcEquine
Delivery Unit.

Charging the Delivery Unit

(Only use the plug charger supplied.)
Insert the lead of the charger into the base
of the Unit, then plug the charger into a
wall socket and switch on.
When the wall socket is switched on you
will hear two short beeps and the left-hand
button will indicate:
Red:
still charging
Amber:
nearly charged
Green:
fully charged and ready for use
After 30 seconds the button will begin to
flash and will continue to do so until the
Unit is fully charged.
When the left-hand button has turned
green your Unit is fully charged. The green
light will remain on for 15 minutes and will
then turn off. When the light is green or
when there are no lights showing, the Unit
can be unplugged.
When your Unit is unplugged you will hear
a beep.
A full charge takes approximately 4.5 hours.
A full charge will enable approximately 35
hours of treatment delivery.
Note: The Unit is supplied with the Audible Beep Alert on.
If you require this function turned off, go to page 5
3