Epson C11C484001 - Stylus C62 Color Inkjet Printer Informationen zum Produkt - Seite 4
Blättern Sie online oder laden Sie pdf Informationen zum Produkt für Drucker Epson C11C484001 - Stylus C62 Color Inkjet Printer herunter. Epson C11C484001 - Stylus C62 Color Inkjet Printer 10 Seiten. Epson stylus c62: product information
Auch für Epson C11C484001 - Stylus C62 Color Inkjet Printer: Spezifikationen (2 seiten), Hier beginnen (2 seiten)
Seite drucken
EPSON Stylus C62
Control Panel
To diagnose some problems, check the printer's control panel,
as described below, or run a printer check (see page 5).
Lights
Explanation
Green P light
The printer is receiving a print job, charging ink, or
flashes
cleaning the print head.
Red b light is on
Your paper ran out, ink ran out, or paper is jammed.
You may also see a message on your screen.
If paper is out, load more paper, then press the b
button to resume printing.
If paper is jammed, first press the b button to eject
the paper. If that doesn't work, turn off the printer,
open the cover, and remove all paper out from the
front, including any torn pieces. Then turn on the
printer, reload paper, and press the b button.
If you see an ink out message on your screen, you
need to replace one of your ink cartridges. Replace
the cartridge as described on page 6.
Red b light
One of the ink cartridges is low. Make sure you have
flashes
a replacement cartridge.
Green P light is
Paper may be blocking movement of the print head.
off and red b light
Turn off the printer, open the cover, and remove any
is on
jammed paper or other foreign objects. Then turn
the printer on again. If the light is still on, contact
your dealer or EPSON.
Green P light and
The printer may have an internal error. Turn off the
red b light flash
printer, wait a few seconds, and turn it on again. If
the lights are still flashing, contact your dealer or
EPSON.
Green P light and
One of your ink cartridges is installed incorrectly.
red b light are on
Follow the instructions on page 6 to remove and
after installing an
install the cartridge.
ink cartridge
Installing the First Ink Cartridges
1. Turn on the printer.
2. Open the output tray and printer cover.
EPSON Stylus C62
4 -
3. Lift up the ink cartridge clamps.
4. Unpack the ink cartridges that came with your printer and
remove the yellow tape.
Black cartridge
Don't remove the seals from the bottom of the
cartridges; ink will leak out. Install both cartridges or
the printer won't work. Keep the cartridges out of the
reach of children.
5. Tilt each cartridge toward you slightly as you insert it.
Lower the cartridge so that the tabs rest on the hooks.
Hooks
Don't place the cartridge tabs under the hooks, or you
may damage the clamp when you close it.
6. Lower the clamps until they click into place.
7. Press the e ink replacement button and close the printer
cover. The green P power light flashes and you hear the ink
charging.
Don't turn off the printer or interrupt charging while
the P power light is flashing or you'll use up more ink
than necessary when you turn it back on.
10/02
Color cartridge