Epson DFX-9000 Benutzerhandbuch - Seite 19
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drucker Epson DFX-9000 herunter. Epson DFX-9000 28 Seiten. 9-pin dot matrix printer
Auch für Epson DFX-9000: Benutzerhandbuch (28 seiten), Spezifikationen (2 seiten), Firmware aktualisieren (1 seiten), Kurzreferenz (12 seiten), Spezifikationen (2 seiten), Hier beginnen (2 seiten)
Seite drucken
http://www.ochimp.com
Setting
Software
0 slash
I/F (Interface) mode
Auto I/F (Interface) wait time
Parallel I/F bi-directional mode
Packet mode
Serial baud rate
Serial parity
Serial data length
Character table
*1
Auto CR (IBM PPDS)
IBM character table (IBM
*1
PPDS)
Buzzer
Low-noise mode
*2
Auto cut mode
*2
Auto cut/back mode
Overlapping multipart forms
Continuous forms with labels
Skip over binding
*3
Get IP address
*4
IP address
http://www.ochimp.com
Options (default in bold)
®
ESC/P,
IBM PPDS
Off, On
Auto, Parallel, Serial, USB, Optional
10 seconds, 30 seconds
Off, On
Auto, Off
19200 BPS, 9600 BPS, 4800 BPS, 2400 BPS,
1200 BPS, 600 BPS, 300 BPS
None, Odd, Even, Ignore
8-bit, 7-bit
Standard version: PC437, PC850, PC860, PC863,
PC865, PC861, BRASCII, Abicomp, Roman8, ISO
Latin 1, PC858, ISO 8859-15, Italic U.S.A., Italic
France, Italic Germany, Italic U.K., Italic Denmark 1,
Italic Sweden, Italic Italy, Italic Spain 1
NLSP version: PC437, PC850, PC860, PC863, PC865,
PC861, BRASCII, Abicomp, Roman8, ISO Latin 1,
PC858, ISO 8859-15, PC437 Greek, PC853, PC855,
PC852, PC857, PC866, PC869, MAZOWIA, Code
MJK, ISO 8859-7, ISO Latin 1T, Bulgaria, PC774,
Estonia, ISO 8859-2, PC866 LAT., PC866 UKR, PC
APTEC, PC708, PC720, PCAR864, PC771, PC437
Slovenia, PC MC, PC1250, PC1251, Italic U.S.A.,
Italic France, Italic Germany, Italic U.K., Italic
Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1
Off, On
Table 2, Table 1
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
Panel, Auto, PING
000.000.000.000 to 255.255.255.255
For More Info
Click Here ===>
Setting
Options (default in bold)
*3
Subnet mask
000.000.000.000 to 255.255.255.255
*3
Default gateway
000.000.000.000 to 255.255.255.255
*5
Save settings?
Yes, No
*1 This setting is available only in IBM PPDS emulation mode.
*2 This setting is available only when the optional perforation cutter (#C81570X) is installed.
*3 These settings are available only when the optional Print Server is installed.
*4 This setting is available only when the optional Print Server is installed and the Get IP address setting is
set to Panel or PING.
*5 This menu appears when you press the Menu buttons (Tear Off and Top of Form) in SelecType mode.
Follow these steps to enter SelecType mode and change the settings:
1.
Make sure paper is loaded and the printer is on.
2.
Press the
buttons (
Menu
Tear Off
mode. The LCD displays the currently selected language.
3.
If you want a different language, press the
(
) button until you see the language you want.
Top of Form
4.
Press the
D (
) button to set the desired language.
Item
Pitch
5.
You see
on the LCD. Press the
Print Settings
print the current settings.
6.
Press the
(
) or
D (
ItemU
Font
Item
want to change.
Note:
You can scroll the menu settings by holding down the
(
) button for a few seconds.
Pitch
7.
Press the
U (
) or
Set
Tear Off
Set
the options available for the current setting until you see the one you want.
Note:
You can scroll the options by holding down the
(
) button for a few seconds.
Top of Form
8.
When you finish making settings, press and hold down the
(
and
). The LCD displays
Tear Off
Top of Form
and
) to enter the SelecType
Top of Form
U (
) or
Set
Tear Off
Set
D
D (
) button to
Set
Top of Form
) button to select the setting you
Pitch
U (
) or
Item
Font
Item
D (
) button to scroll through
Top of Form
U (
) or
Set
Tear Off
Set
D
buttons
Menu
.
Save Setting
Using SelecType Mode 19
D