DigiFarm AGCO C1000 Schnellreferenzkarte

Blättern Sie online oder laden Sie pdf Schnellreferenzkarte für Netzwerk-Hardware DigiFarm AGCO C1000 herunter. DigiFarm AGCO C1000 2 Seiten.

Seite drucken
1
Connect the RV50 cable to the AGI 4 via the
adapter cable and black connector on the back of
the receiver
2
Navigate to the Wrench icon, then System, then Correction level
3
Select Cellular Network; checkmark "Use external radio"; then select the checkmark on the right
4
Set the Correction type to
"RTCM3.X"; Serial Port to "D"; Baud
Rate to match the Beacon; Parity to
"None"; & NMEA Rate to 10
seconds
MD5007
Quick Reference Card
AGCO C1000 Display Setup
rev 6
DigiFarm
AGCO C1000 & RV50
DigiFarm Technical Support
319.531.7574