CREE LIGHTING XSP Series Anweisungen für die Demontage - Seite 2

Blättern Sie online oder laden Sie pdf Anweisungen für die Demontage für Außenleuchte CREE LIGHTING XSP Series herunter. CREE LIGHTING XSP Series 3 Seiten. Street lights
Auch für CREE LIGHTING XSP Series: Installationsanleitung Handbuch (8 seiten)

Seite drucken

Disassemby Instructions

Power Supply (PS)

For End User (EU)

For Control Authority (CA)

N° DOC: DI121RLER0

Rev: 01

PS-EU

a.Open the wiring compartment by unscrewing the two 8 screws

on the appliance door

b.Disconnect the cables from the LED bars from the driver's ter-

minal block 15

c.Disconnect the power cord connected to terminal block 9

d.Unscrew the ground screw 10 paying attention to the notched

washers

e.Unscrew the screws 11 that fix the metal plate 12 on door 13

f. Replace the old wiring plate with a new one

g.Screw screws 11 back on plate 12 and door 13 via a torque of

2.5 Nm

h.Screw 10 back on plate 12 and door 13 by reapplying the not-

ched washers, using a torque of 2.5 Nm

i. Reconnect the cables on driver terminal block 9 (see attached

wiring diagrams)

j. Close the door by tightening screws 8 to the torque of 2.5 Nm

PS-CA

A.Follow points "a-b-c" of paragraph PS-EU

B.Unscrew screws 14 that attach the driver to plate 12

C.Extract the driver

Latest release date: 18/11/2021