Digiflex RF159 Referenzhandbuch für Installateure - Seite 6
Blättern Sie online oder laden Sie pdf Referenzhandbuch für Installateure für Controller Digiflex RF159 herunter. Digiflex RF159 8 Seiten. 2 channel smart rf controller - 433mhz
Seite drucken
RF159 Housing
The RF159 is housed in 3 piece plastic enclosure comprising a base plate , top cover and a terminal cover. The top
cover is fixed to the base using a Phillips head screw. The top cover needs to be removed to install the wire antenna.
The terminal cover is a press fit allowing easy removal. Once the wiring and programming has been completed the
cover should be reinstalled to help prevent the ingress of insects and other debris.
A
Remove
Terminal
Cover
Wall Mounting
A wall mounting tab is located on the inside of the top cover should you wish to locate the unit on a wall or other
structure. Once removed from the cover the tab slides and locks into the base plate as shown below.
Remove Mounting
Tab from underside
Page
6
P/N: RF159IRG Rev 1.3
B
of cover
Remove screw
in base
Lift cover
once screw in
base has been
removed
Push Mounting Tab into un-
derside of base until it locks
in underside of cover
E&OE
Copyright © 2020
C