ARCHITETTURA SONORA CUBE 2LV SUB Schnellstart-Handbuch
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Redner ARCHITETTURA SONORA CUBE 2LV SUB herunter. ARCHITETTURA SONORA CUBE 2LV SUB 2 Seiten.
Seite drucken
CUBE 2LV SUB
400
Unpacking:
to remove the Cube2LV Sub from the shipping box carefully follow these steps
1.
Due to its size and weight, the
Cube2LV Sub is shipped in a box
secured to a pallet with strapping to
allow its handling and movement into
position with a forklift.
4.
Holding the Cube2LV from the
concrete body, NEVER from the base,
gently turn the module, tilting it into
upper position, WITHOUT removing
the protective foam.
2.
After removing the strapping
securing the box to the pallet,
lift and remove the box like in
the image, leaving on the
foam protecting the base.
5.
Lifting the speaker holding its body
remove the protecting foam and set it in
its nal position. Do not drag into position
but always lift it as in the gure above.
SOUND OUTPUT
Speaker type
12" Woofer
Nominal impedence
4
Crossover
no crossover on board - DSP
needed (LP 100 Hz 18 dB/oct min)
Frequency range
20-150 Hz (-6dB)
Sensitivity (1W-1m)
93 dB
Speaker Peak Power
2000W
Speaker RMS Power
1000W
Min. 500W (Class D)
3.
While turning the speaker,
NEVER handle by its base, but
only by its body! Do not remove
the protective foam till the
speaker is nally positioned.
6.
To move the Cube2LV never
drag it on the oor but
ALWAYS lift it as in image 5.
SPECIFICATIONS
Material
Concrete in four nishings,
marbles, travertine and
alternative stones
Mechanic material
stainless steel, brass,
aluminum and
painted graphite
Dimensions
400 x 400 x 560 mm
Weight
85 kg
NO!