Creek Audio 4040 A Gebrauchsanweisung - Seite 11

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Verstärken Creek Audio 4040 A herunter. Creek Audio 4040 A 13 Seiten.

ADDENDUM

SOFTWARE

Like most modern electronic equipment, a digital microcontroller is used to manage almost every function. The

programming of this microcontroller may need to be upgraded over time. To view the revision number, press the

left-hand control knob briefly. Rotate the left-hand knob to select "Info". Press the knob to view the Model: 4040 A

and Revision: 1.8, or higher.

Please check for the latest firmware available on Creek's website.

Device Firmware Update allows certain functions and features to be updated by the dealer via a connection

inside the amplifier. Contact your dealer or importer for more details or write to

for more

information.

RADIO INTERFERENCE

The 4040 A is designed to work properly in normal domestic operating conditions. However, its performance could

be adversely affected if sited near to a mobile phone, light dimmer, wi-fi modem, etc. This may be particularly

noticeable when using Phono input, with the Sequel mk4 installed. Phono cartridges are constructed with a coil

of wire inside that behaves like a radio receiver tuned circuit and antenna. Relocating the 4040 A, or the source of

interference, should normalise the situation.

CAUTION

Do not drive the amplifier to sound pressure levels causing severe audible distortion or clipping (square waves).

Distortion is an indication that either the amplifier or loudspeakers are being pushed beyond their design limits.

Heavily clipped audio signals may damage loudspeakers.

Sustained sound pressure levels from loudspeakers and headphones above 90dB for more than a few minutes are

detrimental to human hearing. Permanent hearing damage may result. Enjoy the music and take care of your ears.

Please contact your supplying dealer or write to

for further information.

Page: