Digifly Archimede Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Avionik-Display Digifly Archimede herunter. Digifly Archimede 20 Seiten.

4.3.4 INTEGRATED (AVERAGED) VARIO

The integrated vario is an average vario reading. This time over which the reading is

averaged is adjustable.

You can change the integration interval by setting parameter (M-SET \ n. 6 INTE)

between "0" and "60" seconds.

It can be delayed or immediate. If you set a value that is too low, its value will be close to

the instantaneous reading. Normally this is the most common setting. It can also be

used for example to see if the rate of lift or sink is improving or getting worse. If the

integrated vario reading over a number of seconds is higher than the actual reading, it

means that you are doing worse than before.

The acoustic vario represents the instantaneous values of the vario with a modulated

tone.

The volume of the tone is adjustable over three levels pressing the

Important: this volume level influence all acoustic indications, but not power ON/OFF

indication.

You can set the threshold level for the Digifly Archimede to indicate lift, go to (M-SET \ n.

2 V.UP) and sink, go to (M-SET \ n. 3 V.DN).

To change the vario tone modulation, based on your personal preferences, go to (M-SET

\ n. 4 TONE), the acoustic vario tone modulation between SFT (soft), STD (standard) and

FAS (fast).

A very useful function to "hear" the vario tone modulation without flying is the Vario

Simulator function, see paragraph below.

The Vario Simultator is a very useful function, that allows to simulate all the vario

instrument functions (acoustic vario, analog and integrator vario) while you are on the

ground.

To activate this function, go to (M-SET \ n. 8 SIMV), press the

and select ON.

Go back to BASIC/ADVANCED display and press up and down the arrow keys

change the vario value.

Important: for your safety, this function is always reset to "OFF" when you turn the vario

on.

4.4

The temperature can be shown on the BASIC/ADVANCED Display screen.

Page 10

key.

key (function "EDIT")