Ayra TDC Acid Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Beleuchtungskörper Ayra TDC Acid herunter. Ayra TDC Acid 15 Seiten. Kaleidoscopic light effect
Seite drucken
To activate the device, plug it into a mains socket. Once it's connected to an active power source, it will turn
on automatically.
The device cannot be operated while it is still starting up and displays the 'AYRA' logo. Once the device has
fully started up, it will automatically jump to the last mode and setting. Operation modes and other settings
shown on the display can now be adjusted or changed via the menu buttons.
If a DMX signal is detected, the device shall automatically switch to DMX mode and the DMX address that
was last used. For a new device, this is usually DMX address 001. The DMX address can of course be
changed via the display and menu buttons.
The functions, modes and settings can be changed by using the display and menu buttons. Push 'Enter' to
select a function or to confirm a change. Push 'Up' and 'Down' to change any values and push the 'Menu'
button to return to the main menu. A few seconds after confirming a setting by pressing 'Enter', the device
shall automatically return to the main menu and perform the set actions. This can be sped up by holding the
'Menu' button down for 2 seconds after confirming a setting by pressing 'Enter'. This is usually done after
adjusting the working mode or DMX address.
The Menu includes the following options and fuctions:
Display
Mode
A001
DMX Address Configuration
SLAV
Slave Mode
T000-T999
Temperature Display
F00-F99
Stroboscope Speed / Auto Mode
D00-D99
Dimmer Level Auto Mode
R000-R255
Prism Rotation Auto Mode
G000-G255
Gobo Wheel Rotation Auto Mode
SP1 - SP9
Speed Auto Mode
SU00-99
Sensitivity
An explanation of all available functions can be found below:
The information in this user manual is subject to change at any time without notice.
Version: 1.0
Date of creation and author's initials: 07-10-2019 RV
Operation and Mounting
Function
Address A001 ... A512
Slave
Displayed in Degrees Celsius
F00 = Static, F01-99 = slow to fast
D00 = Off D99 = Maximum intensity
R0-9 Stop
R10-120 Clockwise rotation, fast to slow
R121-R134 Stop
R135-R245 Anti-clockwise rotation, slow to fast
R246-255 Stop
G0-G63 Gobo selection
G64-G127 Gobo shake selection
G128-G189 Gobo wheel, clockwise rotation, fast
to slow
G190-193 Stop
G194-255 Gobo wheel, anti-clockwise rotation,
slow to fast
SP1 - SP9 (slow to fast)
0 - 100: Sensitivity in %
Revision date and author's initials: -