Creo Trendsetter 400 Visuelle Kurzreferenz - Seite 6
Blättern Sie online oder laden Sie pdf Visuelle Kurzreferenz für Drucker Creo Trendsetter 400 herunter. Creo Trendsetter 400 9 Seiten.
Seite druckenTrendsetter 400/800
!
WARNING: Remove air pressure from the
device before replacing an air filter.*
5 micron filter
0.01 micron filter
part number
part number
55-0760
55-0759
1
Disconnect the compressed air.
Air pressure
drops to 0 psi.
* Refer to the Operator Manual for full details.
Replacing the 5 Micron Filter
Pull the filter tab down, rotate
2
the bowl a quarter turn (either
direction), and pull down.
Remove the old
3
filter and Install the
new one.
Tab
Bowl
Replacing the 0.01 Micron Filter
Pull the filter tab down, rotate
2
the bowl a quarter turn (either
direction), and pull down.
Remove the old
3
filter and Install the
new one.
Tab
Bowl
4
Clean inside the bowl.
Replace the O-ring,
5
if necessary.
6
Reattach the bowl.
5 micron filter
4
Clean inside the bowl.
Replace the O-ring,
5
if necessary.
6
Reattach the bowl.
0.01 micron filter
0.01 micron filter
0.01 micron filter
Replacing the Air Supply Filters
7
Turn on the compressed air.
Air pressure rises to 80 psi.
5