Creo Trendsetter 800 Visuelle Kurzreferenz - Seite 5

Blättern Sie online oder laden Sie pdf Visuelle Kurzreferenz für Drucker Creo Trendsetter 800 herunter. Creo Trendsetter 800 9 Seiten.

Seite drucken
Operator Maintenance and Operations
Trendsetter 400/800
Operations
4
Turn on the output device
These operations are required for some of
4
Turn off the output device
the maintenance procedures below.
9
Reset the output device
Work to
Maintenance
Be Done
Exterior surfaces
Clean
1
Load ramp
Clean
8
Plate roller *
Clean
7
Edge detection strip *
Clean
Compressed air supply
filters:
2
5 micron filter *
Replace
3
0.01 micron filter *
Replace
5
Air intake filter *
Replace
Universal Debris Removal
6
Replace
Cabinet (UDRC) filter **
* Procedures for these items are included in this visual quick reference guide.
** Media dependent
Note: This document is not intended as a substitute for the Trendsetter 400/800
Operator Manual. Refer to the operator manual for detailed procedures.
Software may display differently depending on the version of Print Console in use.
4
How
Date Work
Often
Completed
Weekly
2
Monthly
Every three
months
9
Three
months or
as needed
As needed
N/A
4
1
3
8
Trendsetter 400/800
5
6
7