Creo DocuColor 6060 Technisches Bulletin - Seite 2

Blättern Sie online oder laden Sie pdf Technisches Bulletin für Software Creo DocuColor 6060 herunter. Creo DocuColor 6060 3 Seiten. Xerox docucolor 6060: release note

Seite drucken

-Sep-2003

Release date: 30

§ Set the Spire emulation method to the method that will be used to print the customer job

(CSA/Device Link). Choose the method that best fits the company's type of jobs. The

emulation method is found in Tools\Administration\Preferences\Color\Emulation.

§ Review the "Spire color flow chart" located on the DFE (at:

and PDF\* (Europe or US), Color Flowchart_*.pdf)

color options.

The calibration process

Perform a calibration for every combination of media and screen type used for printing.

1. Load the media to be used for printing on to the DocuColor 6060 printer.

IMPORTANT: Calibrate on the "media" that will be used to run the job.

2. To start the calibration process, in the Spire application, select the

Calibration

then select

3. Confirm that the screen type and paper weight/type is set to the one that will be used

later to print the customer job (i.e. 200 dot, 75 – 105 gsm).

Calibrate

4. Click the

steps.

5. To measure the Creo calibration chart(s), place them on the prepared calibration

surface, on top of the white paper.

6. It is highly recommended that the calibration table be saved with a specific name that

includes the specific paper name and screen method. This helps selecting the proper

calibration table in the job parameter setup.

registered in certain jurisdictions. Other company and brand, product and service names are for identification purposes only and

may be trademarks or registered trademarks of their respective holders. Data is subject to change without notice.

. The Calibration window appears.

button to run the Calibration Wizard. Follow the calibration wizard

D:\Sample Files\General Postscript

for a convenient way to learn about all Spire

Technical Bulletin

Tools

menu, and

Page 2 of 3