FIAM. GHOST 02 Informationen zum Produkt - Seite 6

Blättern Sie online oder laden Sie pdf Informationen zum Produkt für Inneneinrichtung FIAM. GHOST 02 herunter. FIAM. GHOST 02 17 Seiten.

GHOST Chair

Art. 02

Read this information carefully before using the product and keep it for

future reference. Failure to comply carefully with the instructions which

follow may put the safety of the product and its users at risk.

Product description and intended use

• Product description and composition

The GHOST Chair - Art. Code 02 is a Chair intended as an item of indoor furniture. It is manufactured from curved float plate

glass. The GHOST Chair was produced at the FIAM ITALIA SPA factory at Via Ancona 1/B, 61010 Tavullia (PU), Italy - Tel:

+39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it

• Intended use

The article known as GHOST is designed and built to serve as a Chair for indoor use and must therefore be used only for this

purpose and no other.

For more information about the product's intended use please refer to section "2) SAFETY INSTRUCTIONS".

To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions

provided below. If in doubt or if you require further information concerning the use of the product, please contact us on the

telephone numbers stated in this document.

• Transporting and storing the GHOST Chair in the original packaging

The GHOST Chair, in its original packaging, must be transported taking the greatest care to prevent knocks and shaking. It must

be stored indoors in a dry place.

Place the GHOST Chair in the original packaging, in the horizontal position. The arrows on the label on the packaging must be

vertical and pointing upward.

Never place weights or loads in excess of 150 Kg on the original packaging, since exceeding this weight may cause the breakage

of the article.

The GHOST Chair in the original packaging weighs about 64 kg.

It must therefore be placed on surfaces capable of supporting its weight.

• Removing the packaging - assembly

To remove the original packaging of the GHOST Chair, proceed as follows.

a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.

b) Open the packaging crate and remove the sheets of polystyrene. Do not use hammers, saws, cutters or other tools which may

damage the GHOST Chair.

c) Remove the GHOST Chair from its packaging. At least two people are required for this operation. Wear gloves which assure a

good grip on the float glass.

6/16