Digilent PLTW S7 Referenzhandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Referenzhandbuch für Hauptplatine Digilent PLTW S7 herunter. Digilent PLTW S7 11 Seiten.
Seite drucken
PLTW S7 Reference Manual
Callout
1
2
3
4
5
6
7
8
9
10
11
Software Support
The PLTW S7 is fully compatible with the high-performance Vivado® Design Suite versions 2018.1 and newer. It is
supported under the free WebPACK™ installation option, which does not require a license, so designs can be
implemented at no additional cost. This free installation includes the ability to create MicroBlaze™ soft-core
processor designs.
The PLTW S7 can be used with Vivado 2017.4, but WebPACK installations of this version of Vivado may not contain
the device files for the Spartan-7 FPGA used on the PLTW S7. See this
and for a solution.
Functional Description
1
Power Supplies
The PLTW S7 uses a Linear Technologies LTC3569 triple output buck power regulator to generate the needed
voltages for the onboard components. It is connected as shown in Figure 1.1. The characteristics of the outputs are
shown in Table 1.1.
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Description
48-pin DIP form factor headers
FPGA programming DONE LED
Pmod connector
User push buttons
User LEDs
User tri-color LED
UART status LED
Shared USB JTAG/UART port
Power good LED
Spartan-7 FPGA
SPI Flash
Xilinx Answer Record
for more information,
Page 2 of 11