Cres Cor RO151033 Handbuch für Installation, Betrieb und Wartung - Seite 5
Blättern Sie online oder laden Sie pdf Handbuch für Installation, Betrieb und Wartung für Kommerzielle Lebensmittelausrüstung Cres Cor RO151033 herunter. Cres Cor RO151033 11 Seiten. 8kw rethermalizers
Seite drucken
5925 Heisley Road • Mentor, OH 44060-1833
PRE-SETS:
The control can hold up to 18 saved recipes, 5 of them have been pre-set for different types of food product .
REVOLUTION FOODS PRE-SET RECIPES:
Recipe #
Recipe 1
Recipe 2
*Recipe 3
Recipe 4
Recipe 5
* For RO151034 only: Recipe #3, Cook Temp. is 250
TO USE THE PRE-SET RECIPES:
1 . Push the RECIPE 1-6 button .
2 . Turn the SET knob to one of the 5 recipes and press
the SET knob to select .
3 . Press the START button to preheat .
When the display shows "READY", load the food into
the unit and press the START button again to begin the
cooking .
SAVING NEW RECIPE:
1 . Press and hold both the TIME button and the SET
knob for 5 seconds. The screen will be flashing. This
is the setup menu .
2 . Turn the knob through the menu until you get to
"Edit" .
3 . Press the SET knob and turn to one of the recipes
you want to edit choose 6-18, DO NOT CHANGE
RECIPES 1-5 .
4 . Press the SET knob and enter the cook, hold and time
values .
5 . After the entering the final value, "Edit" will show
again .
6 . Press the SET knob to edit more recipes or turn knob
to "End" and press the SET knob to exit the menu .
Quick Recipe Note:
You can set "Quick Recipes" for recipes that you use
often . This way, when you press a recipe group button and
press start, that recipe will start cooking without searching
for the recipe number . Recipe numbers can be set up as
"quick recipes" as follows:
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
OPERATING INSTRUCTIONS (continued)
Food Type
Very delicate foods
Delicate foods
Dense foods
Vegetable #1
Vegetable #2
Cook Temp
HoldTemp
225
250
270
250
250
°
F at 45 min. of Cook Time
Quick Recipe Note: (continued)
1 . Press and hold both the TIME button and the SET
knob for 5 seconds to get into the menu .
2 . Turn the SET knob to "RBTN" and press the SET
knob. The word "PUSH" will flash.
3 . Press one of the recipe group buttons to assign a
recipe .
Note: Recipe numbers 1-6 can be set up as Group button 1 .
Recipe numbers 7-12 can be set up as Group button 2 .
Recipe numbers 13-18 can be set up as Group button 3 .
4 . Turn the SET knob to the recipe number you want to
assign to that button and press the SET knob .
Repeat the process to assign recipes to the other two
recipe group buttons; or, turn the SET knob to "END" the
submenu; turn to "END" the menu.
The DISPLAY button shows (cycles through) all the
values when in each mode:
•
"PREHEAT" OR "READY": momentarily shows the
actual cabinet temperature .
•
"COOK" (Timed): shows Home screen, set point,
count down time, actual cabinet temperature .
•
"COOK" (Probe): shows Home screen, set point,
count up time, actual cabinet temperature .
•
"HOLD": shows Home screen, set point, count up
time, actual cabinet temperature .
FL-RO151033
Rethermalizer
Page 5 of 11
Rev. 3 (5/14)
Cook Time (min.)
135
20
135
25
135
35
135
75
135
110