Cres Cor CO151F1818 Handbuch für Installation, Betrieb und Wartung - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch für Installation, Betrieb und Wartung für Konvektionsofen Cres Cor CO151F1818 herunter. Cres Cor CO151F1818 10 Seiten. Cres cor inc. convection and retherm ovens installation, operation and maintenance manual
5925 Heisley Road • Mentor, OH 44060-1833
VENTING YOUR OVEN:
1.
The purpose of ventilating hoods is to direct and
capture smoke, grease-laden vapors, heat, odors, or
fumes.
2.
Low temperature equipment (maximum temperature
250°F/121°C) does not produce heat, odors, fumes,
grease-laden vapors or smoke and is not required to be
vented.
HOT UNIT SPECIFICATIONS:
MODELS with FOUR (4) HEATERS at 2000 Watts each (Total: 8200 Watts.)
MODEL NOS. *
HU-18-671-120-MP
HU-18-671-122-MP
HU-18-671-121-MP
HU-18-671-123-MP
MODELS with THREE (3) HEATERS at 2000 Watts each. (Total: 6200 Watts.)
HU-18-671-138-MP
HU-18-671-142-MP
HU-18-671-139-MP
HU-18-671-143-MP
MODELS with THREE (3) HEATERS at 1500 Watts each. (Total 4700 Watts.)
HU-18-671-124-MP
HU-18-671-137-MP
HU-18-671-125-MP
HU-18-671-127-MP
HU-18-671-140-MP
HU-18-671-144-MP
HU-18-671-141-MP
HU-18-671-145-MP
*NOTE: Suffi x "F" for 5 preset keys, "T" for 10 preset keys. All models are designed for AC Service.
HOW TO INSTALL CABINETS:
1.
Remove all packing material from inside cabinet.
2.
Install the cabinet interior (pan slides).
3.
Place hot unit (shipped separately) on the top of the
cabinet. Caution: Hot unit is heavy, be sure to have
plenty of help during installation.
4.
Plug power cord into wall receptacle.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
INSTALLATION INSTRUCTIONS
ELECTRICAL SPECS
(AC SERVICE)
Volts
Ph
Hz.
208
1
60
240
1
60
208
3
60
240
3
60
208
1
60
240
1
60
208
3
60
240
3
60
Rev. 1 (4/08)
3.
Most jurisdictions consider our low-temperature ovens
(maximum temperature is 350°F/177°C) as low-heat
appliances not requiring vent hoods.
4.
Installation must conform with local codes. The
authority having jurisdiction of enforcement of
the codes will have the responsibility for making
interpretations of the rules.
ELEC. LOAD
POWER SUPPLY REQUIREMENT
Amps
Volts
Amps
39
208
50
34
240
50
18
208
30
16
240
30
23
208
30
20
240
30
13
208
20
12
240
20
CAUTION
To install stacking units, refer to instruction sheet
FL-2211, "STACKING INSTALLATION".
FL-2202-MP-M
Ovens
Page 3 of 10
Ph
Wire
Volts
1
3
208
1
3
240
3
4
208
3
4
240
1
3
208
1
3
240
3
4
208
3
4
240
NEMA
6-50P
6-50P
L15-30P
L15-30P
6-30P
6-30P
L15-20P
L15-20P