Digilin Flare Installationshandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Installationshandbuch für Außenleuchte Digilin Flare herunter. Digilin Flare 3 Seiten. Wall wash uplight
Seite druckenFlare - Wall Wash Uplight
Installation Guide
Installation
Fitting Location
Panel Mount
(Requires rear access)
1.
Cut the specified hole size in the mounting
panel. Maximum panel thickness is 20mm.
4.
Feed the locknut over the cable and start to
screw onto the fitting body.
7.
Run cable back to a dry location and
connect to power.
Note. Non-Dimmable fittings connect in
parallel, Dimmable fittings connect in series.
digilin.com.au
+617 3899 1267
2.
Remove the lock nut from the fitting.
5.
Align the fitting so that the beam will shine
onto the wash surface as indicated by the
label on top of the fitting.
8.
Turn on power.
3.
Feed the cable and fitting through the pre-
cut hole.
6.
Tighten the locknut.
Page 2 of 3