Cres Cor H137WSUA5DMFBC Handbuch für Betrieb und Wartung - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Speisenwärmer Cres Cor H137WSUA5DMFBC herunter. Cres Cor H137WSUA5DMFBC 8 Seiten. Humidity holding hot cabinet
5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
Model: H137 series Humidity Holding Hot Cabinet
BUC-EE'S PROGRAMMING REVISION J-08
How to use the Automatic Water Fill:
There is a water fill connection under the bottom left
rear of the oven. Remove the plug on the end of the
connector.
1. Connect the plastic tubing provided to the
connector and the other end to your water supply.
Turn water supply on.
2. Press and hold both the DISPLAY button and the
knob of the AquaTemp humidity control for five
seconds.
3. Turn the knob until when the display shows FILL,
select "Y" for yes and press the knob to set.
4. Go to END to exit the menu. Auto water fill should
start.
To shut down:
1. Press and hold both the DISPLAY button and the
knob of the Aquatemp humidity control.
2. Turn the knob to FILL and push to enter. Select
"N" for no; go to END to exit the menu.
3. Turn off your water supply and clean out the water
pan after it cools.
NOTES: It is recommended to use treated water to
prevent failure of fill valve. If water supply pressure is
high, it is recommended to regulate it to make sure the
fill valve closes reliably.
HOW TO TURN UNIT OFF:
Push switch off; light will go out.
HOW TO CLEAN THE UNIT:
Soil
ROUTINE CLEANING
CABINET
STUBBORN SPOTS AND
Inside
STAINS
and
BURNT-ON FOODS OR
Outside
GREASE
(Stainless Steel)
HARD WATER SPOTS
and SCALE
*Mild detergents include soaps and non-abrasive cleaners.
NOTE: Gaskets are removable for cleaning.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
DAILY MAINTENANCE:
WATER PAN
Drain, wipe and fill water pan daily. (Clear vinyl drain hose
is provided.)
1. Push hose onto drain nozzle under the cabinet base.
2. Turn knob to open the drain.
CABINET
1. Wipe the inside of the cabinet after daily use.
2. LEAVE DOORS SLIGHTLY OPEN TO FULLY
DRY INTERIOR.
WARNING
BEFORE CLEANING CABINET:
1. Allow cabinet to cool.
2. Do NOT hose cabinet with water.
3. Do NOT get water on controls.
4. Do NOT use abrasives or harsh chemicals.
Delime or descale water pan parts as required,
to prevent damaging build-up. WARRANTY
COVERAGE MAY BE AFFECTED WITHOUT
PROPER CLEANING.
Cleaning hints:
1. Wipe up spills as soon as possible.
2. Clean cabinet regularly to avoid heavy dirt build-up.
3. Make a test spot with cleaner.
4. Follow manufacturer's directions on cleaner.
5. Do not mix cleaners.
6. Avoid drips and splashes.
7. Do not use "Cres Clean" on plastic parts or labels.
Cleaner
Soap, Ammonia, or mild
*detergent and water.
Mild abrasive made for
stainless steel.
Chemical oven cleaner for
stainless steel.
Vinegar
Insulated
FL-2355-BC
Hot Cabinets
Rev. 2 (12/20)
Page 3 of 8
Method
1. Sponge on with cloth.
2. Rinse with water.
3. Wipe dry.
1. Apply with damp sponge or cloth.
2. Rub lightly.
Follow oven cleaner manufacturer's
directions.
1. Swab or wipe with cloth.
2. Rinse and dry.