Accurite 06053 Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Wiederholer Accurite 06053 herunter. Accurite 06053 8 Seiten. Wireless signal repeater

Seite drucken

Important Placement Guidelines

Repeater is water-resistant and is designed for general outdoor use, however,

to extend its life place the repeater in an area protected from direct weather

elements.

Hang the repeater using the integrated hang hole or hanger, or by using string

(not included) to hang it from a suitable location.

• Repeater must be within 330 ft (100 m) of companion units (sold seperately).

• To maximize wireless range, place repeater away from large metallic

items, thick walls, metal surfaces, or other objects that may limit wireless

communication.

• To prevent wireless interference, place repeater at least 3 ft (0.9 m) away

from electronic devices (TV, computer, microwave, radio, etc.).

Problem

Companion product (i.e.

Display) showing poor

sensor reception

Available sensor not

connecting to repeater

If the companion product's wireless signal indicator

shows poor reception, it may be an indication that it

is still connecting directly to the sensor, instead of the

repeater.

1. Power down the companion product (unplug power

adapter, remove batteries).

2. Confirm that the sensor is connected to the repeater.

The repeater's active channel ID will flash, indicating

that the sensor's data is being transmitted.

3. Relocate the sensor to its original location.

4. Place the repeater according to suggested

placement (see page 4).

5. Power on the companion product.

If the LED indicator does not flash:

• Relocate the repeater and/or Monitor/Sensor. The

products must be within 330 ft (100 m) of each other.

• Make sure products (Repeater, display, Monitors,

Sensors) are placed at least 3 feet (.9 m) away

from electronics that may interfere with the

wireless communication (such as TVs, microwaves,

computers, etc).

• Use standard alkaline batteries (or lithium

batteries in Repeater, Monitors and Sensors when

temperature is below -4ºF/-20ºC). Do not use

heavy duty or rechargeable batteries.

It may take a few minutes for repeater and

NOTE:

sensors to synchronize after batteries are replaced.

Possible Solution