Digilock DCR1-APV1 Produkthandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Produkthandbuch für Schlösser Digilock DCR1-APV1 herunter. Digilock DCR1-APV1 4 Seiten. Rfid cam locks advanced security assigned use

Digilock DCR1-APV1 Produkthandbuch
Support
Error Condition Indicator
Locks emit feedback when an error condition exists.
2 sets of three beeps:
The batteries are low. Replace the batteries.
1 beep:
The lock does not recognize the RFID Card or Key.
Does not Unlock with the RFID Card or User Key
The lock does not recognize the RFID Card or User Key. Follow Assign User Credential instructions to assign the RFID Card or User
Key to the lock. For immediate access, operate the lock with a registered Manager Bypass Key.
Does not Operate with a Manager Bypass Key
The lock does not recognize the Manager Bypass Key. Follow Register/Add Manager Bypass Key(s) instructions to register
the Manager Bypass Key to the lock. For immediate access, operate with another registered Manager Bypass Key or with the
Programming Key.
Does not Operate with the Programming Key
The lock does not recognize the Programming Key. Contact Digilock Support for assistance.
No Audible Feedback when
a.
The batteries may need to be replaced.
b.
Replace the batteries.
c.
If error condition persists, contact Digilock Support.
Battery Failure
If the door is locked and the batteries have failed, use the Manager Bypass Key to provide external power and operate the lock.
a.
Touch and hold the Manager Bypass Key to the key slot for approximately 10 seconds until a triple-tone beep is heard.
b.
Turn the knob/lever to the unlocked position.
Battery Replacement
1
It is not necessary to remove the lock from the door to change the batteries.
1
The batteries are located
behind the rear cover.
Ensure that the cam is not
obstructing access to the rear
cover screw.
PG-DCR1-AP-DEN
021314
Product Guide
RFID Cam Locks Advanced Security
is Pressed
`
2
2
Remove the screw and rear
cover.
Assigned Use
DCR1-APV1
3
3
Replace with three premium
alkaline AA batteries.
4
4
Replace the rear cover and
secure the screw in place.
Phone: 707 766 6000
www.digilock.com | [email protected]