FIAMA EP3 Benutzerhandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte FIAMA EP3 herunter. FIAMA EP3 8 Seiten. Battery-powered electronic position indicator
Seite druckenEP3
Manual purpose
This manual has been designed by the Manufacturer to provide the necessary information
regarding the EP3 instrument to those who are authorized to carry out safely its installation,
maintenance, dismantling and disposal. All the necessary information for buyers and planners can
be found in the sales catalogue. In addition to adopting good technical construction methods, this
information should be read carefully and strictly applied. Nonobservance of this information could
cause risks for the health and safety of people and economic damage. This information, provided
by the Manufacturer in the original language (Italian) is also available in other languages to satisfy
legislative and/or commercial needs. This manual must be kept in good conditions by a
responsible person in an ideal place so that it is always available for consultation. In case this
manual is lost or deteriorates, a replacement should be requested directly to the manufacturer
quoting the manual code. This manual reflects the state of the instrument at the time of input in
the market: however, the manufacturer reserves the right to make changes, add or improve the
manual without notice.
Identification of the product
The identification label is applied on the instrument.
To determine the identification code of the instrument, consult also the sales catalogue.
Environmental conditions
Temperature range: min. 0°C - max. +50°C.
It is forbidden to use the instrument other than for its intended use and in potentially explosive
conditions or where anti-explosive elements are used.
Storage
Here below are some recommendations to be followed for the storage of the instrument:
•
Avoid environments with excessive humidity and those exposed to bad weather (avoid
open areas).
•
Avoid placing the instrument directly on the ground.
•
Store the instrument in its original packing.
Conformity declaration and EC marking
The instrument respects the following EC Community Directive:
2014/30/EU Electromagnetic compatibility, 2011/65/EU RoHS.
Maintenance
The instrument does not require particular maintenance except cleaning, to be done only with a
soft cloth slightly damped with ethylic alcohol or water. Do not use hydrocarbon solvents (petrol,
thinners, etc.): the use of these products could affect the proper functioning of the instrument.
Repairs should be done only and exclusively at the FIAMA technical assistance centre.
Calibrations and tests
It is advisable to calibrate the instrument periodically, once every working year.
To do the calibration, follow the procedure indicated in the present manual.
Assistance request
For any kind of technical assistance request, contact the sales department of the Manufacturer
directly indicating the information given on the identification label, the number of hours used and
the type of defect.
Manufacturer's responsibility
The manufacturer declines any responsibility in case of :
•
Use of the instrument contrary to the national safety and accident-prevention laws.
•
Incorrect installation, incorrect procedures or nonobservance of the instructions provided in
the present manual.
•
Defective electrical power supply.
•
Modifications or tampering.
•
Operations carried out by untrained or unqualified staff.
Date: 30/10/23
File: EP3_ing.doc
Electronic position indicator
Page: 2/8