Digilock Numeris Versa Mini Produkthandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Produkthandbuch für Tastenfeld Digilock Numeris Versa Mini herunter. Digilock Numeris Versa Mini 11 Seiten. Touch rfid
Auch für Digilock Numeris Versa Mini: Handbuch (18 seiten), Produkthandbuch (11 seiten)
Seite drucken
Programming Instructions - In Assigned Use Functionality
Remove User Credentials (for assigned use functionality only)
Make sure the lock is in assigned use functionality (a green LED will fl ash when = is pressed). The locks must be reprogrammed to remove
user credentials from operating a lock.
1
Collect all remaining and replacement user credentials
(User Codes and User Keys).
3
Insert the Manager Key again.
Three sets of two-tone beeps will be heard and the LED will turn off.
All previously assigned user credentials will be removed.
Replace an Assigned User Credential
1
Replace an Assigned User Code
with a New User Code:
Press
= `
then insert a valid Manager Key.
A two-tone beep will be heard and the LED will
turn on.
6
Product Guide
2a
Press
=` 55 `
The LED will fl ash.
While the LED is fl ashing, insert a valid Manager Key.
A two-tone beep will be heard.
4
Follow Assign User Credentials instructions to assign the remaining and
replacement user credentials to the locks.
2
While the LED is on,
= [assigned user code] `
press
.
A two-tone beep will be heard.
Keypad
Shared & Assigned Use Functionality
2b
.
3
While the LED is on,
= [new 4-7 digit user code] `
press
= [the same 4-7 digit user code] `
Two sets of two-tone beeps will be heard
and the LED will turn off.
.