Digilock NEXT cue Installationshandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Installationshandbuch für Durch Schlösser Digilock NEXT cue herunter. Digilock NEXT cue 16 Seiten. Rfid interface bolt mechanism
Auch für Digilock NEXT cue: Produkthandbuch (6 seiten), Produkthandbuch (5 seiten)

Seite drucken
Digilock NEXT cue Installationshandbuch

Installation

1
0 . 3 2
( 8 m
Position the strike plate on the door frame aligning it with
the center of the lock's mounting holes
3
Drill 025" (635 mm) pilot holes using a 1/6" drill bit
5
0 . 3 2
( 8 m
Adjust the strike plate to the proper position (32" (8 mm)
from the door edge) then tighten the self tapping screws
i n
m )
Mark Here
Drill Pilot
Holes Here
i n
m )
2
0 . 3 2
( 8 m
Allow 32" (8 mm) from door edge and mark the position
of the adjustment slot holes
4
Position the strike plate and the self tapping screws into the
adjustment slot holes Do not tighten the screws
6
Position and tighten the remaining self tapping screw
into the center hole
i n
m )
Mark Here
11