Digilock Numeris Versa Mini Produkthandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Produkthandbuch für Rfid Systems Digilock Numeris Versa Mini herunter. Digilock Numeris Versa Mini 11 Seiten. Touch rfid
Auch für Digilock Numeris Versa Mini: Produkthandbuch (11 seiten), Handbuch (18 seiten)
Seite drucken
Programming Instructions
Replace Programming Key or Manager Credentials
The locks must be reprogrammed to prevent the lost/stolen Programming Key or Manager Credentials from operating a lock.
1
To replace the Programming Key:
Note the order or serial number (found on the lock's rear).
1a
To replace the Manager Credentials:
Collect all remaining and replacement Manager Credentials.
Go to any lock operated by the lost/stolen Manager Credentials.
Touch and hold ` for 5 seconds (a two-tone beep will be heard after 5
seconds) then release.
The LED will fl ash.
Request Functionality Change
1
Note the order or serial number (found on the
lock's rear).
4
Product Guide
1b
2
Note the current color of the LED.
Touch RFID
Shared & Assigned Use Functionality
2
Contact Digilock Support to purchase a replacement Programming Key.
2a
While the LED is fl ashing, insert the Programming Key.
A two-tone beep will be heard.
Insert the Programming Key again.
Three sets of two-tone beeps will be heard and the LED will turn off. All
previously programmed Manager Credentials will be erased.
Follow instructions to Add Manager Credentials to program the remaining
and replacement Manager Credentials to the locks.
3
LED Usage Indicator
Shared Use
Assigned Use
To change the functionality of the locks
(between shared use and assigned use), contact
Digilock Support to request a Function Key.
2b