Cres Cor H137SRR Series Handbuch für Betrieb und Wartung - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Wärmeschublade Cres Cor H137SRR Series herunter. Cres Cor H137SRR Series 12 Seiten. Companion holding cabinet for use with convotherm c2020 roll-in rack

Seite drucken
Companion
FL-2335
Holding Cabinet
Rev. 0 (2/07)
Page 2 of 10
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137SRRC2020C Companion Holding Cabinet
INITIAL OPERATION:
(For fi rst-time operation only)
A new oven needs to "burn off" manufacturing oils
and excess adhesive before its fi rst use.
Do NOT load food into oven until this has
been done!
1.
Turn the POWER switch on. The yellow light will
turn on.
2.
Turn the thermostat to #10.
3.
Let the unit operate for one hour.
4.
Turn unit off and let cool
5.
Wipe inside clean with detergent and hot water.
Air is VERY HOT when door is opened.
Yellow Light
"On-Off" Switch
5925 Heisley Road • Mentor, OH 44060-1833
Thermometer
"Air" Thermostat
Figure 2
HOW TO START UNIT:
1.
Turn the POWER switch on. The yellow light will turn on.
2.
Turn the thermostat to #6-1/2.
3.
Preheat cabinet for one (1) hour.
4.
Put food into cabinet
5.
Turn thermostat to desired setting and close door.
No. 8 setting = approx. 185°F / 85°C
No. 6 setting = approx. 160°F / 71°C
No. 4 setting = approx. 130°F / 54°C
Proper food holding temperature is 140°F / 60°C or higher.
NOTE: The optional digital thermometer display fl ashes
when temperature in center of cabinet is below
140°F (60°C) or above 250°F (121°C). Call the
factory if you need different settings.
TO TURN OFF UNIT:
Turn the POWER switch off. The yellow light will go out.