Crescent Nordic XT Gebrauchsanweisung - Seite 4

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Stroller Crescent Nordic XT herunter. Crescent Nordic XT 16 Seiten.

Seite drucken

7. Adjusting the footrest

In order to adjust the footrest a push/pull

In order to adjust the footrest please push

technique must be applied. Push the footrest

the buttons on the side while moving the

inwards to make it adjustable. When the

inwards to make it adjustable. When the de-

footrest to desired position.

desired position is reached pull outwards until

sired position is reached pull outwards until

it locks into position.

8. Canopy adjustment

To adjust the canopy to desired position

8. Canopy locking

simply grab on to the canopy top and pull or

To lock the canopy in fully unfolded position,

push until desired position.

use your hand to drag it out to position.

use your hand to drag it out to position. A

A click should be felt when the canopy is fully

click should be felt when the canopy is fully

9. Handle height adjustment

unfolded and locked in position.

There are multiple handle height positions.

unfolded and locked in position. Someti-

The canopy can also be extended by

To adjust, press the centre button on both

mes a small force/handpress from above is

unzipping the zipper.

needed to reach the locking position.

sides and simultaneously and adjust to de-

sired level.

9. Swivel lock/release

To change the front wheels from fixated or

10. Using the brakes

swiveled function adjust the button left or

To apply brake, press down gently on the

right.

middle of the brake bar. To release brake,

place foot under brake bar and pull up.

Warning always apply the brakes when the

10. Handle height adjustment

9. Swivel lock/release

pushchair is stationary and when placing or

There are multiple handle height positions.

To change the front wheels from fixated or

removing the child.

To adjust, press the centre button on both

swiveled function adjust the button left or

sides and simultaneously and adjust to

right.

11. Folding the chassis

desired level. Release button and engage

Pull the folding handles on both sides (A)

at the desired height.

10. Handle height adjustment

whilst folding the backrest/chassi forward to

There are multiple handle height positions.

initiate the folding sequence (B)

11. Using the brakes

To adjust, press the centre button on both

Lift the safety latch on the right side to com-

To apply brake, press down gently on

sides and simultaneously and adjust to desi-

plete the folding process (C)

the middle of the brake bar. To release

red level. Release button and engage at the

brake, place foot under brake bar and pull

desired height.

12. 5-point safety harness

upwards. Warning always apply the brakes

Feed the buckle tongues 1 & 2 into the buck-

when the pushchair is stationary and

11. Using the brakes

le housing 3 and click together. Adjust your

placing or removing the child.

To apply brake, press down gently on the

five-point harness at the points indicated. To

middle of the brake bar. To release brake,

unfasten the harness squeeze in the buckle

Warning Always keep the barking brake

place foot under brake bar and pull upwards.

tongues 1 & 2 and pull out of the buckle hou-

engaged when placing and removing the

Warning always apply the brakes when the

sing 3. D-Rings are provided for attaching an

child.

pushchair is stationary and placing or remo-

extra harness complying to BS 6684.

ving the child.

Warning. To avoid serious injury, always use

the 5-point safety harness.

The restraint system shall not be removed.