Crescent trike Gebrauchsanweisung - Seite 3

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Stroller Crescent trike herunter. Crescent trike 11 Seiten.

Seite drucken

7. Attaching seat unit to chassi

Insert the seat adaptor assembly into the

main connector on the frame. You can po-

sition the seat unit to have your child facing

you or facing forward.

Warning! This seat is not suitable for child-

ren under 6 months.

Warning! Check that the pram body (car-

rycot) or seat unit attachment devices are

correctly engaged before use.

8. Reclining the seat unit

To recline the seat unit press the grey but-

tons on both sides and move into required

reclined or upright position. Release but-

tons when in desired position.

9. Adjusting the footrest

Press both buttons on the sides of the leg

rest, adjust to desired position and release

to lock.

10. Front wheel

The front wheels can be selected either in a

fixed position or in a swivel position.

11. Handle height adjustment

There are seven handle height positions. To

adjust, press the grey centre button and pull

up simultaneously to desired level. Release

button and engage at the desired height.

Crescent trike recommended accessories:

• Crescent raincover for seat and carrycot

• Crescent sun parasol

• Crescent mummy bag

• Maxi-Cosi car seat adaptors

• Inovi cup holder

• Inovi memoryfoam seatpad

• Bumprider stand-on board

Please see crescentbarnvagnar.se for more info

12. Using the brakes

To apply brake, press down gently on

the middle of the brake bar. Rocking the

pushchair assists engagement. To release

brake, place foot under brake bar and pull

upwards.

Warning always apply the brakes when the

pushchair is stationary.

13. Folding the chassi

Remove the seat unit before folding. Press

the grey handle height adjuster button 1

whilst depressing the secondary lock but-

ton 2. When the handle is at its lowest point,

push downwards to disengage and fold the

stroller 3. Apply the hold together latch as

per picture 1 on previous page.

trike general instructions

14. 5-point safety harness

Feed the buckle tongues 1 & 2 into the

buckle housing 3 and click together.

Adjust your five-point harness at the points

indicated in the direction of the double ar-

rows as required.

To unfasten the harness squeeze in the

buckle tongues 1 & 2 and pull out of the

buckle housing 3.

D-Rings are provided for attaching an extra

harness complying to BS 6684.

Warning. To avoid serious injury, always use

the 5-point safety harness.