Crescent SC8000 Handbuch zur Fehlersuche - Seite 2
Blättern Sie online oder laden Sie pdf Handbuch zur Fehlersuche für Bodenmaschine Crescent SC8000 herunter. Crescent SC8000 2 Seiten.
Seite druckenATTENTION! Do not use the machine before you have read and understood the Instructions for use manual
The machine
doesn't work
as it should?
The suction
doesn't work
as it should?
The machine
doesn't clean
as it should?
The brushes
don't work as
they should?
1 Check the Diesel fuel tank level /
LPG bottle charge. In case re-fill/
change the LPG Bottle
1 Check the height of the squeegee
by adjusting the castor wheels
1 Open broom door compartment
and check presence of roped or
debris that can block it
1 Remove and clean the brushes.
Check they rotates and touch the
floor properly
2 Check that engine starting battery
is fully charged
2 Check squeegee hose clean and
not clogged by debris
2 Check if the right solution/clean
water tap is open
2 Make sure that deck and squeegee
are moving down when pressing
the button
3 Brake pedal disengaged to
operate. Circuit breakers must be
all armed
3 Recovery tank seal cover must
correctly installed and in good
condition
3 Solution valve must be open and
solution flow pump hoses filled
3 Adjust the water flow
www.crescentindustrial.co.uk
SC8000
4 Tow valve lever must be in the
proper position
4 Inspect the squeegee blades for
cuts or chunks
4 If necessary open the solution filter
cage and clean the net
4 Adjust the detergent percentage