Diginet DGEMSR360P1 Benutzer- und Installationshandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzer- und Installationshandbuch für Sicherheitssensoren Diginet DGEMSR360P1 herunter. Diginet DGEMSR360P1 16 Seiten. Recessed flush mount 360 pir presence sensor

Seite drucken

DIGINET ENERGY MANAGEMENT

Figure 3 – DGEMSR360P2 electrical connections (ILSCM02-D two channel module).

5.2.

Override 'OFF'

The presence sensor has an override 'OFF' function that is activated by an external switch connected to the

control module. This function only operates Relay 1 for both one and two channel control modules. Relay 2 in the

two channel model will continue to operate under presence detection mode.

The override switch has two methods of connection: dry contact switch input across both terminals to make a

closed circuit or a switched active input. A latched contact/switch (not momentary/push button) must be used in

both methods. Refer to Figure 4 for the electrical connections of the two methods for operating the override

function.

Note: Terminals S1 and S2 require a consistent polarity if installing one or more switches to a single

or multiple control modules.

S 2

S 1

Figure 4 – Override 'OFF' switch connection options.

Diginet Control Systems Pty Ltd

A/L

S 2

S 1

Latched contact / switch

S 2

S 1

Dry contact

Recessed Flush Mount 360

Load 1

Switched Active

Active – any phase and/or circuit

Neutral

Active

See Section 5.2 for override

switch connections

Active – any phase and/or circuit

Switched Active

Load 2

n/c

(same circuit as A/L)

PIR Presence Sensor

Neutral

Active

Page 6 of 16