Cisco 1503 Software-Handbuch - Seite 29

Blättern Sie online oder laden Sie pdf Software-Handbuch für Schalter Cisco 1503 herunter. Cisco 1503 49 Seiten. Cisco systems switch user manual

Management Configuration Commands

Use the commands in this section to configure community strings and trap managers, which

are required when using SNMP.

IP Parameter Commands

Use the commands in this section to configure the Micro Hub 1503 with IP parameters. The

hub must be configured with IP parameters to use SNMP, Telnet, and TFTP functions.

show ip configuration

Syntax:

Mode:

Description:

show ip configuration

Guest

Shows the current configuration for IP, as shown below:

Hub> show ip configuration

IP address: 10.10.10.10

Subnet mask : 255.255.255.0

Gateway IP: 10.10.10.254

Command Display Definitions

• IP address—Hub's IP address.

• Subnet mask—Hub's subnet mask (the host address bits used for routing

traffic to the subnet).

• Gateway IP—Gateway used to pass trap messages from the hub to the

management stations, for example, the IP address of a router on the same

LAN as the hub.

Management Configuration Commands

Using Your Hub Software 3-29