digiO2 ECG-10X Benutzerhandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medizinische Ausrüstung digiO2 ECG-10X herunter. digiO2 ECG-10X 13 Seiten. Ecg/ekg recorder
Seite drucken3. Connect Mini USB cable
．Prepare one Mini USB cable
．Please connect Mini USB/USB cable to Cardio Care.
4-1. Go to the device's Historical record page
4-2. Press
to enter the desired record for upload. The screen
will show " Upload to Server?"
4-3. Press
to upload the record to PC/ server.
4-4. If the upload is complete, the PC/ server monitor will show
ECG/EKG waveform.
<NOTE>
If user connect the ECG with PC by USB cable, the ECG will not has measurement function,
and user can only transfer the data to PC.
Important Safety Note
Safety Labels Used in this Manual
"
Warning" indicates a potentially hazardous situation which, if not
avoided, could result in serious injury.
Warning:
．The device is not design intended for complete diagnosis of cardiac
conditions. The device measure heart rate and heart rhythm only
．Do not use this unit if you have a cardiac pacemaker or other implanted
devices.
．Do not use this unit with a defibrillator or HF surgical equipment.
．Do not strong shock, drop and vibrations
．Do not use this unit during an MRI Scan. (Contraindications for
undergoing an MRI scan for spine-related pain in the back, neck or leg
include: Patients who have a heart pacemaker, a metallic foreign body
(metal sliver) in their eye, and who have an aneurysm clip in their brain.)
．Do not attempt self-diagnosis or self-treatment based on the measurement
results and analysis. Always consult your doctor. Self-diagnosis or
self-treatment may lead to deterioration in your condition.
．Do not use this unit on people with sensitive skin or allergies.
．Do not attempt to use the unit over or through clothing.
．Do not attempt to use the unit with your left hand.
．Do not use for any purpose other than obtaining an electrocardiograph.
．Do not use batteries of a type other than that specified in this manual.
．Do not measure if dust is on the electrodes. Clean them first.