Cisco 2948G - Catalyst Switch Hardware-Fehlerbehebung - Seite 20
Blättern Sie online oder laden Sie pdf Hardware-Fehlerbehebung für Schalter Cisco 2948G - Catalyst Switch herunter. Cisco 2948G - Catalyst Switch 30 Seiten. End-of-sale and end-of-life announcement
Auch für Cisco 2948G - Catalyst Switch: Handbuch für häufig gestellte Fragen (7 seiten), Produkt-Support-Bulletin (3 seiten)
Seite drucken
1 .. ffffffff 4e88958b
2 .. ffffffff b965ace8
3 .. ffffffff 70a608c8
4 .. ffffffff e873ea40
216540 bytes available (15512100 bytes used)
Cat4000−c>
show config
This command displays the non−default system configuration. This is useful to capture every time you make a
configuration change as a way to possibly associate changes to hardware or software problems. Notice there is
is a timestamp for each output. Compare the output to the show config all command output, which shows the
entire system configuration and can be quite lengthy. Refer to the show config command for more
information.
Cat4000−c> (enable) show config
This command shows non−default configurations only.
Use 'show config all' to show both default and non−default configurations.
.............
..................
....................
..
begin
!
# ***** NON−DEFAULT CONFIGURATION *****
!
!
#time: Tue Jan 22 2002, 11:20:05
!
#version 6.3(1)
!
!
#system web interface version(s)
!
#test
!
#system
set system name
!
#frame distribution method
set port channel all distribution Mac both
!
#vtp
set vtp domain blah
!
#ip
set interface sc0 1 172.16.84.200/255.255.255.0 172.16.84.255
set interface sl0 down
set interface me1 1.1.1.1 255.255.255.0 1.1.1.255
set ip route 0.0.0.0/0.0.0.0
!
#syslog
set logging level cops 2 default
!
#set boot command
set boot config−register 0x2102
clear boot system all
!
42a97c
17
78e71c
18
b8fa9c
20
f0b224
17
Cat4000−c
4106492 Aug 17 2001 16:22:52 cat4000.6−3n
3554592 Nov 28 2001 10:38:33 cat4000.5−5n
4199168 DEC 07 2001 10:30:01 cat4000−k9.n
3651336 DEC 11 2001 12:26:20 cat4000.5−5n
172.16.84.1