DIGIOXI PO-930 Benutzerhandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Monitor DIGIOXI PO-930 herunter. DIGIOXI PO-930 19 Seiten. Pulse oximeter monitor

The Bar graph indicates the pulse signal height and varies from 1 to 8. Increasing the signal amplitude

increases the Bar graph value. Bellow number 2 in bar graph, the message WEAK PULSE is displayed.

Alarm messages

HIGH SpO2

limit is violated.

LOW SpO2

HIGH PULSE

LOW PULSE

LOW BAT

WEAK PULSE

SEARCHING

CK SITE

PULSE

ALARM OFF

PULSE OFF

SENSOR OFF

NO SENSOR

This indicator always lights with AC connected, even with the battery fully charged.

Operators Manual Pulse Oximeter Monitor DIGIOXI "PO-930"

- Light when selecting the high SpO2 alarm limit and when the high SpO2 alarm

- Light when selecting the low SpO2 alarm limit and when the low SpO2 alarm

limit is violated.

- Light when the high pulse alarm limits is being selected or is violated.

- Light when the low pulse alarm limits is being selected or is violated.

- This alarm is triggered when the battery needs to be recharged.

- This message is displayed if the amplitude of the pulse signal is low causing

instability in SpO2 monitoring. Check the probe installation, site perfusion and

body temperature.

- This message is displayed when the monitor is self adjusting the ideal point of

signal monitoring.

- This "CHECK SITE" message is displayed when the monitor have not

encountered a good point to signal monitoring. Check the probe installation.

- This message is displayed when the operator is adjusting the pulse alarm

volume.

- This message indicates the disable of the alarm sound for 2 minutes

(flashing message) or disable (continue display message permanently).

- This message indicates the pulse volume was reduced to minimum.

-This alarm message indicates that the sensor is not installed to the patient or a

problem in the sensor.

- This alarm message indicates that no sensor is connected to the monitor.

- This indicator light when the monitor is connected to the AC line and the battery

is recharging.

Digicare Biomedical Technology Inc.