Cisco 3560-48TS - Catalyst EMI Switch Datenblatt - Seite 9
Blättern Sie online oder laden Sie pdf Datenblatt für Schalter Cisco 3560-48TS - Catalyst EMI Switch herunter. Cisco 3560-48TS - Catalyst EMI Switch 23 Seiten. Cisco catalyst 3560-48ts: product brochure
Auch für Cisco 3560-48TS - Catalyst EMI Switch: Produkt-Bulletin (5 seiten), Produkt-Support-Bulletin (6 seiten), Spezifikationen (3 seiten), Produkt-Support-Bulletin (4 seiten), Broschüre (8 seiten)
Seite drucken
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Availability and Scalability
Superior Redundancy for
Fault Backup
High-Performance IP Routing
Integrated Cisco IOS Software
Features for Bandwidth
Optimization
● Cisco Uplink Fast and BackboneFast technologies help ensure quick failover recovery,
enhancing overall network stability and reliability.
● IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) provides rapid spanning-tree
convergence independent of spanning-tree timers and the benefit of distributed
processing.
● Per-VLAN Rapid Spanning Tree Plus (PVRST+) allows rapid spanning-tree
reconvergence on a per-VLAN spanning-tree basis, without requiring the implementation
of spanning-tree instances.
● Cisco Hot Standby Router Protocol (HSRP) is supported to create redundant, fail-safe
routing topologies.
● Command-switch redundancy enabled in Cisco Network Assistant software allows
designation of a backup command switch that takes over cluster-management functions
if the primary command switch fails.
● Unidirectional Link Detection Protocol (UDLD) and Aggressive UDLD allow
unidirectional links to be detected and disabled to avoid problems such as spanning-tree
loops.
● Switch port autorecovery (errdisable) automatically attempts to reenable a link that is
disabled because of a network error.
● Cisco RPS 2300 support provides superior internal power-source redundancy, resulting
in improved fault tolerance and network uptime.
● Equal cost routing (ECR) provides load balancing and redundancy.
● Bandwidth aggregation up to 8 Gbps through Cisco Gigabit EtherChannel technology
and up to 800 Mbps through Cisco Fast EtherChannel technology enhances fault
tolerance and offers higher-speed aggregated bandwidth between switches and to
routers and individual servers.
● Cisco Express Forwarding hardware routing architecture delivers extremely high-
performance IP routing.
● Basic IP unicast routing protocols (static, RIPv1, RIPv2 and RIPng) are supported for
small-network routing applications.
● Advanced IP unicast routing protocols (OSPF, Interior Gateway Routing Protocol
[IGRP], EIGRP, Border Gateway Protocol Version 4 [BGPv4] and IS-ISv4) are supported
for load balancing and constructing scalable LANs. The IP Services license is required.
● IPv6 routing capability (OSPFv3, EIGRPv6) is support. IP Services license is required.
● Policy-Based Routing (PBR) allows superior control by enabling flow redirection
regardless of the routing protocol configured.
● Inter-VLAN IP routing provides for full Layer 3 routing between two or more VLANs.
● Protocol Independent Multicast (PIM) for IP Multicast routing is supported, including PIM
sparse mode (PIM-SM), PIM dense mode (PIM-DM), and PIM sparse-dense mode. The
IP Services license is required.
● Fallback bridging forwards non-IP traffic between two or more VLANs.
● Per-port broadcast, multicast, and unicast storm control prevents faulty end stations
from degrading overall systems performance.
● IEEE 802.1d Spanning Tree Protocol support for redundant backbone connections and
loop-free networks simplifies network configuration and improves fault tolerance.
● PVST+ allows for Layer 2 load sharing on redundant links to efficiently use the extra
capacity inherent in a redundant design.
● IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) allows a spanning-tree instance
per VLAN, enabling Layer 2 load sharing on redundant links.
● ECR provides load balancing and redundancy.
● VPN routing/forwarding (VRF)-Lite enables a service provider to support two or more
VPNs, with overlapping IP addresses.
● Local Proxy Address Resolution Protocol (ARP) works in conjunction with Private VLAN
Edge to minimize broadcasts and maximize available bandwidth.
● VLAN1 minimization allows VLAN1 to be disabled on any individual VLAN trunk link.
● VLAN Trunking Protocol (VTP) pruning limits bandwidth consumption on VTP trunks by
flooding broadcast traffic only on trunk links required to reach the destination devices.
● Internet Group Management Protocol v3 (IGMP) Snooping for IPv4 and IPv6 MLD v1
and v2 Snooping provide fast client joins and leaves of multicast streams and limits
bandwidth-intensive video traffic to only the requestors.
● IGMP filtering provides multicast authentication by filtering out nonsubscribers and limits
the number of concurrent multicast streams available per port.
● Multicast VLAN registration (MVR) continuously sends multicast streams in a multicast
VLAN while isolating the streams from subscriber VLANs for bandwidth and security
reasons.
Data Sheet
Page 9 of 22