Cisco 3750 - Catalyst EMI Switch Handbuch "Erste Schritte - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Schalter Cisco 3750 - Catalyst EMI Switch herunter. Cisco 3750 - Catalyst EMI Switch 27 Seiten. Catalyst 3750 series switches
Auch für Cisco 3750 - Catalyst EMI Switch: Datenblatt (18 seiten), Installations-Manuale (47 seiten), Faq (10 seiten), Produkt-Bulletin (5 seiten), Produkt-Support-Bulletin (6 seiten), Produktübersicht (25 seiten), Beschreibung (1 seiten), Datenblatt (23 seiten), Produkt-Support-Bulletin (6 seiten), Datenblatt (23 seiten), Handbuch "Erste Schritte (33 seiten)

Enter this information in the Network Settings fields:

Step 11

• In the Management Interface (VLAN ID) field, the default is 1. Enter a new VLAN ID

only if you want to change the management interface through which you manage the

switch. The VLAN ID range is 1 to 1001.

• In the IP Address field, enter the IP address of the switch. In the IP Subnet Mask field,

click the drop-down arrow, and select an IP Subnet Mask.

• In the Default Gateway field, enter the IP address for the default gateway (router).

• Enter your password in the Switch Password field. The password can be from 1 to 25

alphanumeric characters, can start with a number, is case sensitive, allows embedded

spaces, but does not allow spaces at the beginning or end. In the Confirm Switch

Password field, enter your password again.

(Optional) You can enter the Optional Settings information now or enter it later by using

Step 12

the device manager interface:

• In the Host Name field, enter a name for the switch. The host name is limited to 31

characters. Embedded spaces are not allowed.

• Enter the date, time, and time zone information in the System Date, System Time, and

Time Zone fields. Click Enable to enable daylight saving time.

Step 13

(Optional) Click the Advanced Settings tab on the Express Setup window, and enter the

advanced settings now or enter them later by using the device manager interface.