Accusplit AX602M500 Betriebsanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Siehe Accusplit AX602M500 herunter. Accusplit AX602M500 15 Seiten. Digital quartz stopwatches

Seite drucken

1. How to Delete All Memory Segments

12-13

date-month (d-m), Sound ON or OFF , Contrast

(darkness of the digits - default is 9), then back to

Second, and recycles again.

Note: when the second is to be set, press [START

• SPLIT] to reset the second digits to zero. At the

end of setting, press [RECALL] (S4) or [MODE] to

exit from the setting mode and back to Time of

Day Display.

Display for Sound ON or

OFF setting :

(Let the current status be "ON" .)

Press [START • SPLIT] to toggle

Sound ON or OFF .

Display for contrast adjustment:

(Let the current contrast be "5")

14-15

Alarm Time Mode

Press [MODE] until you enter Alarm mode. This

mode is used for displaying the daily alarm time

and allows you to enable or disable the alarm.

When you enter the Alarm Time mode, the display

shows the alarm time on the upper line while the

date is shown in the middle of the display and the

normal time is on the lower line.

Alarm

Indicator

S O U n d

O n

S O U n d

O n

C O n T

° Alarm Time

° day, month - date

° hr : min second

Press [START • SPLIT] conse-

cutively to advance the contrast

up to 16, then cycle back to 1.

The contrast setting will be

shown on the display.

NOTE:

• The hour digits may be displayed in 12 hr or

24 hr format.

• The year digits can be set from 2000 to 2099.

The date adjusts automatically for odd and even

months including February of leap years. The

day of week also adjusts automatically after you

set the date.

To toggle the alarm ON or OFF , press [STOP • RESET].

When alarm is ON, the indicator " " will be ON

while it will be turned off when alarm is disabled.

When alarm time is reached, the alarm signal will

sound for 60 seconds. Press any button to stop the

alarm sound.

Setting Alarm Time

Press and hold [RECALL] (S1) for 2 seconds to ac-

tivate the alarm setting. The alarm "minute" digits

will ﬂ ash as an indication. Adjust the ﬂ ashing digit

by pressing [START • SPLIT] (S3). To set the alarm

hour digits, press [STOP • RESET] (S2) to switch to

hour digits and then press [START • SPLIT] (S3) to

adjust. Press [RECALL] (S4) or [MODE] to exit from

Alarm setting mode.

C O n T

1 6