Digiplex DGP-641 Programmierhandbuch

Blättern Sie online oder laden Sie pdf Programmierhandbuch für Tastenfeld Digiplex DGP-641 herunter. Digiplex DGP-641 2 Seiten.

Seite drucken
DGP-641 LCD Keypad V1.3

Programming Guide

P
M
ROGRAMMING
ETHOD
STEP 1: Press and hold the [0] key
STEP 2: Enter the [
INSTALLER CODE
STEP 3: Enter section [953]
STEP 4: Enter the keypad's 8-digit [
STEP 5: Enter the 3-digit [
STEP 6: Enter the required data
To view the keypad's serial number, press and hold the [0] key,
then enter the [
INSTALLER CODE
that you use this sheet to keep track of which sections were
programmed and how. This module can also be programmed using
the control panel's Broadcast Programming Feature (see Digiplex
Installation & Reference Manual).
P
S
ROGRAMMING
ECTIONS
In the following tables and sections, any value represented in bold
is the default setting.
SECTION [001]: Partitioning
Option
[1]
Partition 1
[2]
Partition 2
[3]
Partition 3
[4]
Partition 4
[5]
Not used
[6]
Not used
[7]
Not used
[8]
Not used
SECTION [002]: General Options
Option
[1]
Display Code Entry
[2]
Display Exit Delay
[3]
Display Entry Delay
[4]
Confidential Mode
[5]
To Exit Confidential Mode
[6]
Not used
[7]
Not used
[8]
Not used
]
]
SERIAL NUMBER
] you want to program
SECTION
] and enter [000]. We recommend
OFF
ON
l Disabled
l Enabled
l Disabled
l Enabled
l Disabled
l Enabled
l Disabled
l Enabled
l N/A
l N/A
l N/A
l N/A
l N/A
l N/A
l N/A
l N/A
OFF
ON
l Disabled
l Enabled
l Disabled
l Enabled
l Disabled
l N/A
l Disabled
l Enabled
l Enter Code
l Press Button
l N/A
l N/A
l N/A
l N/A
l N/A
l N/A
SECTION [003]: General Options
Option
[1]
Muting
[2]
Exit Delay Beep
[3]
Not used
[4]
Chimed Zone Closure
[5]
Not used
[6]
Not used
[7]
Not used
[8]
Not used
SECTION [004]: Beep on Trouble
Option
System & Clock Trouble Beep l Disabled
[1]
Communicator Trouble Beep l Disabled
[2]
Module & Bus Trouble Beep l Disabled
[3]
[4]
All Zone Trouble Beeps
[5]
Not used
[6]
Not used
[7]
Not used
[8]
Not used
SECTION [005]: PGM Options
Option
[1]
PGM State is Normally
[2]
PGM Timed Mode
[3]
PGM Base Time
[4]
PGM Override
[5]
Keypad Tamper
[6]
Not used
[7]
Not used
[8]
Not used
SECTION [006]
Confidential Mode Timer (005-255 seconds)
___/___/___ (default = 120)
SECTION [007]
PGM Timer (000-255 see option [3] in section [005])
___/___/___ (default = 005)
SECTION [008]
PGM Activation Event: PGM Table in Digiplex Programming Guide
___/___ [1 2 3 4 5 6 7 8] (default = 0 / 0 all off)
SECTION [009]
PGM Deactivation Event: PGM Table in Digiplex Programming Guide
___/___ [1 2 3 4 5 6 7 8] (default = 0 / 0 all off)
M
P
ESSAGE
ROGRAMMING
Each section from [101] to [249] contains one message with a
maximum of 16 characters. For more details and to record any
changes, use the DGP-641 LCD Programming Guide.
Section [101] to [148] = Zone 01 to Zone 48 respectively
Section [149] to [244] = Code 01 to Code 96 respectively
Section [245] = Paradox Family
Section [246] to [249] = First, Second, Third, & Fourth Area
After entering the section corresponding to the desired message,
the message can be re-programmed to suit your installation needs
as detailed in Table 1. For example, section [101] "ZONE 01" can
be changed to "FRONT DOOR".
OFF
ON
l Disabled
l Enabled
l Disabled
l Enabled
l N/A
l N/A
l Disabled
l Enabled
l N/A
l N/A
l N/A
l N/A
l N/A
l N/A
l N/A
l N/A
OFF
ON
l Enabled
l Enabled
l Enabled
l Disabled
l Enabled
l N/A
l N/A
l N/A
l N/A
l N/A
l N/A
l N/A
l N/A
OFF
ON
l Open
l Closed
l Disabled
l Enabled
l 1 Second
l 1 Minute
l Disabled
l Enabled
l Disabled
l Enabled
l N/A
l N/A
l N/A
l N/A
l N/A
l N/A