Cisco 9124 - mds multilayer fabric switch Freigabemitteilung - Seite 27

Blättern Sie online oder laden Sie pdf Freigabemitteilung für Schalter Cisco 9124 - mds multilayer fabric switch herunter. Cisco 9124 - mds multilayer fabric switch 36 Seiten. Mds 9000 series
Auch für Cisco 9124 - mds multilayer fabric switch: Spezifikationen (2 seiten), Datenblatt (9 seiten), Spezifikationen (3 seiten), Konfigurationshandbuch (49 seiten), Freigabemitteilung (48 seiten), Freigabemitteilung (44 seiten), Freigabemitteilung (22 seiten), Freigabemitteilung (3 seiten), Freigabemitteilung (40 seiten), Handbuch (16 seiten), Hardware-Installationshandbuch (36 seiten)

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .

Maximum Number of Zones Supported in Interop Mode 4

In interop mode 4, the maximum number of zones that is supported in an active zone set is 2047, due to

limitations in the connected vendor switch.

When IVR is used in interop mode 4, the maximum number of zones supported, including IVR zones,

in the active zone set is 2047. The limit for the maximum number of IVR zones per VSAN is 250 zones

(two members per zone).

Configuring Default Settings for the Default Zone

Following an upgrade from any Cisco SAN-OS 2.x release to any Cisco SAN-OS 3.x release, the

configuration defined by the zone default-zone permit vsan vsan-id command is applied only to the

active VSAN. The configuration does not apply to unconfigured VSANs. In SAN-OS 3.x, you can apply

the configuration to unconfigured VSANs by issuing the system default zone default-zone permit

command.

Similarly, the zoneset distribute full vsan vsan-id command applies only to the active VSAN following

an upgrade from any Cisco SAN-OS 2.x release to any Cisco SAN-OS 3.x release.

Although you can configure the default-zone settings in the setup script, these settings do not take effect

for VSAN 1, because VSAN 1 already exits prior to running the setup script. To configure the default

settings for the default-zone in VSAN 1, you must explicitly enter the zone default-zone permit

command.

Caveats

This section lists the open and resolved caveats for this release. Use

particular caveat. In the table, "O" indicates an open caveat and "R" indicates a resolved caveat.

Table 9

DDTS Number

Severity 2

CSCei82909

CSCsh31236

CSCsh98705

CSCsi31860

CSCsi33540

CSCsi56775

CSCsi80055

Severity 3

CSCin95789

CSCsd21187

CSCse31881

OL-12208-05

Open Caveats and Resolved Caveats Reference

Software Release (Open or Resolved)

3.1(2b)

Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.1(3)

Caveats

Table 9

to determine the status of a

3.1(3)