Cisco 9134 - MDS Multilayer Fabric Switch Konfigurationshandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Schalter Cisco 9134 - MDS Multilayer Fabric Switch herunter. Cisco 9134 - MDS Multilayer Fabric Switch 49 Seiten. Mds 9000 series
Auch für Cisco 9134 - MDS Multilayer Fabric Switch: Spezifikationen (3 seiten), Freigabemitteilung (48 seiten), Freigabemitteilung (44 seiten), Freigabemitteilung (22 seiten), Freigabemitteilung (3 seiten), Freigabemitteilung (40 seiten), Anmerkungen zur Veröffentlichung (10 seiten), Handbuch (16 seiten), Hardware-Installationshandbuch (36 seiten)

C-Series IP Storage Services Modules (IPS-4, IPS-8),

Multi-protocol Services Module (14/2) and MDS 9216i

conﬁguration constraints

C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services

Module (14/2) and MDS 9216i constraints

Table 1 C-Series iSCSI limits

iSCSI component

iSCSI host connections per port

Active LUNs per port

Number of Initiator/Targets (IT) Nexus per port

Number of active LUNs per IT Nexus

Number of IT Nexus/LUNs combinations per port

Examples of maximum conﬁgurations for IT Nexus:

•

200 iSCSI initiators each connected to one target (storage controller port)

•

100 iSCSI initiators each connected to two targets

•

50 iSCSI initiators each connected to two targets and 100 iSCSI initiators each connected to

one target

Table 2 iSCSI host limits for Windows 2003

iSCSI host component

Targets accessed per host

LUNs per target

The C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module (14/2), and

MDS 9216i switch are supported on any currently supported HP Infrastructure C-Series switch fabric. For

the latest HP Infrastructure switch topologies and fabric rules, refer to the HP StorageWorks SAN design

reference guide, which can be downloaded from the following web site:

http://h18000.www1.hp.com/products/storageworks/san/documentation.html

Conﬁguring SANs with C-Series switches and iSCSI in a

Windows environment

To conﬁgure the C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module

(14/2) and MDS 9216i switch in an HP Fibre Channel SAN:

1. Enable iSCSI on the C-Series switch

2. Present iSCSI hosts as virtual FC hosts

3. Install the Microsoft iSCSI initiator

Maximum

200

256

1200

Maximum

255