Cisco Aironet 350 Series Kennenlernen - Seite 15

Blättern Sie online oder laden Sie pdf Kennenlernen für Schalter Cisco Aironet 350 Series herunter. Cisco Aironet 350 Series 16 Seiten. Managed switches
Auch für Cisco Aironet 350 Series: Schnellstart-Handbuch (12 seiten), Anmerkungen zur Veröffentlichung (14 seiten), Schnellstart-Handbuch (16 seiten), Schnellstart-Handbuch (12 seiten), Schnellstart-Handbuch (12 seiten), Schnellstart-Handbuch (2 seiten), Handbuch (10 seiten), Schnellstart-Handbuch (5 seiten)

Get To Know Your Switch

Navigation

The navigation menu, located at the top right of each UI page, lists the device's main features.You can access

each feature's UI pages using a series of cascading menus. To access an individual UI page, click the

corresponding feature tab in the navigation menu to display a menu of subcategories. Select a subcategory

and repeat this process until you see the desired page, and then select the page to display it in the main window.

Basic or Advanced Display Mode

The product supports many features, and therefore the WEB GUI includes hundreds of configuration and

display pages. These pages are divided into the following display modes:

• Basic—Basic subset of configuration options are available. If you are missing some configuration option,

• Advanced—Full set of configuration options are available.

When the user switches from basic to advanced, the browser reloads the page. However, after reload, the user

stays on the same page. When the user switches from advanced to basic, the browser reloads the page. If the

page exists also on the basic mode, the user stays on the same page. If the page does not exist in the basic

mode, the browser will load the first page of the folder which was used by the user. If the folder does not

exist, the Getting Started page will be displayed.

If there is advanced configuration, and the page is loaded in basic mode, a page-level message will be displayed

to the user (e.g. there are 2 radius server configured but in basic mode only a single server can be displayed,

or there is 802.1X port authentication with time range configured but time range is not visible in basic mode).

When switching from one mode to another, any configuration which was made on the page (without Apply)

is deleted.

• With the power on, press and hold the Reset button for more than ten seconds.

select the Advanced mode in the device header.

Navigation

Get To Know Your Switch