AccuSport VectorX Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör AccuSport VectorX herunter. AccuSport VectorX 19 Seiten. Personal launch monitor

Marking the Ball

The VectorX Launch Monitor uses black marks on the golf ball to measure the

ball flight parameters. The marks must face the VectorX unit when the ball is

positioned for hitting. No other ball marks should be visible to the camera. If

making your own marks, they should be made using a black Sharpie

face of a white ball.

Positioning the Ball

left tee

right tee

zone

October 2011

Logo Method - Most golf balls on the market today provide a

marking with a straight line type orientation as pictured, or you

may also use the stripe method below.

Line method - Draw a black line at least one inch long on the

blank face of the ball. The mark must be clearly visible when it

is facing the VectorX and must be drawn perfectly straight.

There are a number of golf ball marking devices commonly used

in the industry that will work for placing the line on the ball for

use with the VectorX.

Use the Setup Template to tee up the ball in the

correct position. If you are not using the Setup

Template, review the setup illustration on page 6, to

understand the golfer position and hitting zones. The

VectorX must be level to the hitting surface. Tee the

ball up in the Right Tee Zone for a right-handed

golfer.

For a left-handed golfer, position the VectorX facing

the hitter and tee the ball up in the Left Tee Zone.

*Note: Do NOT leave Setup Template in place

when hitting shots.

Page 6

on a blank