S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Set Java 1.5 to the path that is to be used for installing Fabric Manager.
Step 1
Install the database that is to be used with Fabric Manager.
Step 2
Copy the Fabric Manager jar file m9000-fm-3.2.1.jar from the CD-ROM to a folder on the Solaris
Step 3
workstation.
Launch the installer using the following command:
Step 4
Follow the onscreen instructions provided in the Fabric Manager management software setup wizard.
Step 5
To install Fabric Manager on Windows, follow these steps:
Click the Install Management Software link.
Step 1
Choose Management Software > Cisco Fabric Manager.
Step 2
Click the Installing Fabric Manager link.
Step 3
Step 4
Select the drive for your CD-ROM.
Step 5
Click the FM Installer link.
Step 6
Follow the onscreen instructions provided in the Fabric Manager Installer 3.2(1).
To install Device Manager on your workstation, follow these steps:
Step 1
Enter the IP address of the switch in the Address field of your browser.
Step 2
Click the Cisco Device Manager link in the Device Manager installation window.
Step 3
Click Next to begin the installation.
Follow the onscreen instructions to complete the installation of Device Manager.
Step 4
General Upgrading Guidelines
Use the following guidelines when upgrading to Cisco MDS SAN-OS Release 3.2(1):
•
•
•
•
•
OL-14116-01
java -Xmx256m -jar m9000-fm-3.2.1.jar
Install and configure dual supervisor modules.
Issue the show install all impact upgrade-image CLI command to determine if your upgrade will
be nondisruptive.
Follow the recommended guidelines for upgrading a Cisco MDS 9124 Switch as described in
"Upgrading a Cisco MDS 9124 Switch" section on page
Follow the guidelines for upgrading a single supervisor switch as described in
Disruptive Upgrade on a Single Supervisor MDS Family Switch" section on page
Be aware that some features impact whether an upgrade is disruptive or nondisruptive:
–
Fibre Channel Ports: Traffic on Fibre Channel ports can be nondisruptively upgraded. See
Table 6
for the nondisruptive upgrade path for all SAN-OS releases.
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(1)
Upgrading Your Cisco MDS SAN-OS Software Image
20.
"Performing a
20.
13
Seite drucken