BYOC BA6110 Anleitung Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Musik-Pedal BYOC BA6110 herunter. BYOC BA6110 14 Seiten.

Step 4: install the trimpots. They will only have 3 legs, but the board has 5 holes. This is so

that the board can accomodate more than one brand of trimpot. There should only be one

way to fit your trimpot into the space provided without having to bend the legs very much.

You may have to bend them a little bit if they were bent in shipping, but you should not have

to stretch the legs to get it to fit. If you do, then you are doing something wrong. The 500k

adjusts the clock. You want to set this so that the vibrato sounds as full as possible without

sounding too noisy. The 10k biases the reference voltage for the buffer circuit. You want to

set the pedal to ramp ON so that you hear a buffered dry signal. Strum your guitar very

hard. Adjust this trimpot untill the buffered dry signal is clean there is no distortion.

Step5: install the first 4 transistors (Q1 - Q4) highlighted in red. These are the BC550.

Step 6: install the next 7 transistors (Q5 - Q11) highlighted in blue. These are the 2SC945.

The transistors will probably only be labelled C945.

Step7: Install the last 3 transistors (Q12 - Q14)highlighted in purple. These are the 2SA733

but will probably only be labelled A733.