Digiray FireCR Flash Installationshandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Installationshandbuch für Zahnärztliche Ausrüstung Digiray FireCR Flash herunter. Digiray FireCR Flash 12 Seiten. Computed radiography reader
Seite drucken
Connections
Connecting the scanner with USB cable
Insert the USB cable into the socket on the back of the scanner (1),
insert the other end into an available USB port in the computer.
Insert the power cable into the power inlet (2), insert the other end
into a power outlet and switch this on.
Switch the scanner on (3) and allow the computer to setup drivers
as needed.
3. Power switch
On
Off
1. USB socket
2. Power inlet
The first time the scanner is connected to your software it
synchronize calibration data which may take a few minutes, once
this is finished you will be ready to scan images.
For wall mounted units, select wall mount in the IP calibration
menu under settings.
10
FireCR Flash
Installation Manual