DigiSender Plug'n'Go LCD Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Empfänger DigiSender Plug'n'Go LCD herunter. DigiSender Plug'n'Go LCD 16 Seiten. 5.8ghz single input ‘plug style’ wireless av sender

Seite drucken

DX2000-LCD - DigiSender® Plug'n'Go™ LCD

Troubleshooting

Picture Problems

The picture is present but

poor quality

POOR RANGE

1. The picture & sound quality is

affected by the Transmitter and

Receiver's location. Try position-

ing them in different locations.

The Transmitter and Receiver

should be connected to a mains

extension lead that can be

moved.

2. Try the other 3 available

Audio/Video channels ensuring

that the Audio/Video Channel

setting is the same on both the

Transmitter and Receiver.

3. Ensure the units are within the

usable range, normally this

would be 40m when passing

through 2 average internal walls.

Thicker or stone/granite walls

may lower the usable range of

this device.

Page 10

Q: What do you see on your second television?

I see a black or blank screen

Switch OFF your DigiSender® TRANSMITTER

What do you now see at the second TV?

I still see a Black Screen...

WRONG AV CHAN-

NEL SELECTED

1. Switch the Transmitter back

on.

2. Ensure the correct SCART

channel is selected on your sec-

ond television. Some televisions

feature multiple AV channels for

one or more SCART, phono and

S-Video inputs.

3. If available try another SCART

socket on the second television.

Please read this instruction manual carefully prior to installation

I now see a snowstorm or

blue screen...

RECEIVING BLANK

SIGNAL

1. Switch the Transmitter on.

2. Ensure the Transmitter is con-

nected to your source device

(such as your Satellite, Cable,

Freeview, DVD or VCR).

3. Ensure that your source device

is switched on.